: Before application, ensure that the grout is clean, dry, and free from any dirt, grease, or residues.
Apply the Universal
Cleaner: Spray approximately 10-20ml of Universal Cleaner per square meter on the surface. Let it act briefly, then rinse with a water-saturated cloth or rinse thoroughly if possible. Dry the surface.
Apply the Grout Hydrophobe: Ensure the grout is clean and dry. Shake the product well. Using a brush, apply Grout Hydrophobe evenly across the grout lines until saturated. Wipe off any excess product from the tiles with a cloth.
Allow to Dry: Let the treated grout lines dry thoroughly for 24 hours. Avoid touching or stepping on the treated areas during this time.
Maintenance: To maintain the protection, clean the treated grout lines regularly using a soft cloth. If you notice the protective effects diminishing, reapply the Grout Hydrophobe as needed.
Safety: Always wear gloves during application. Ensure good ventilation in the working area. Store the products out of reach of children and pets. In case of contact with eyes, rinse immediately with plenty of water. Always conduct a patch test on a small area before full application.