Protection solutions
tailored to your surfaces

What do you want to protect?

At home as in a hotel, surfaces are used every day. Water leaves deposits on glass, grout absorbs moisture and fabrics can hold on to small accidents.

• BathroomShower walls, mirrors, ceramic and mineral grout.
• KitchenStainless steel, chrome, glass or ceramic backsplashes.
• BedroomsBedding, headboards, armchairs and compatible surfaces.
• Common areasLobby furniture, benches and windows in shared spaces.
• WindowsResidential or commercial glazing that stays clean longer.

The situations we address

• Limescale and water marksDrops dry on the walls and make cleaning a constant chore.
• Absorbent groutMineral grout can hold moisture and dirt.
• Everyday stainsFabrics and leather are exposed to splashes and dirt.
• Frequent upkeepSurfaces in a home or a lodging are used day after day.

Simple, step by step

The right product depends on the material. The product page remains the reference for conditions, quantity and drying time.

1. 1PrepareIdentify the material. Clean and dry the surface; for glass and ceramic, first remove existing deposits with the matching preparer.
2. 2Apply the right treatmentFollow the product page for that surface. The method differs between glass, grout, stainless steel, textile and leather.
3. 3Let it cureRespect the drying time and the delay before use shown on the product.

Our products for this use

Choose the room first, then the material, to find the right treatment.

• Glass and ceramicTwo-step anti-limescaleSurface preparation, then hydrophobic protection for glass and ceramic.View product
• Mineral groutGrout protectionFor cement or mortar grout; not intended for epoxy or silicone.View product
• Textile and leatherTextile/leather protection and stain removerAn option for sofas, armchairs, clothing and other compatible items.View product
• WindowsSelf-cleaning window treatmentA solution dedicated to residential glazing.View product

Homeowners and professionals follow the same path, by item and material. The suggested size is a starting point: you can change the size and quantity on the product page or in the cart.

What do you want to protect?

The outside and inside surfaces of a vehicle are exposed to water, salt and dirt. The right treatment can make them easier to maintain.

• BodyPaint, rims and bumpers on cars or trucks.
• GlassWindshield and other glass surfaces.
• InteriorSeats and textile or leather parts.
• Two-wheelersMotorcycle and bike; confirm compatibility for each surface.

The situations we address

• Road salt and grimeContaminants build up and make washing take longer.
• Rain on the windshieldDrops and residue reduce visibility.
• Stains in the cabinSeats and upholstery can absorb liquids.

Simple, step by step

The right product depends on the material. The product page remains the reference for conditions, quantity and drying time.

1. 1Wash and decontaminateStart on a clean surface. Proper preparation helps the treatment bond correctly.
2. 2Choose by materialUse the product made for the body, the glass or the textile/leather. Do not use a product on a surface it is not intended for.
3. 3Apply as directedFollow the quantity, wiping method and drying time of the chosen treatment.

Our products for this use

Choose the product based on your vehicle's surface.

• Paint and rimsCar and truck protectionTreatment for paint, rims and bumpers.View product
• WindshieldWater-repellent windshield treatmentHelps water run off compatible glass.View product
• SeatsTextile and leather protectionFor compatible textile or leather interior surfaces.View product

Homeowners and professionals follow the same path, by item and material. The suggested size is a starting point: you can change the size and quantity on the product page or in the cart.

What do you want to protect?

Water, deposits, insects and humidity make it harder to maintain a boat or a personal watercraft, especially exposed glass and textiles.

• Boat windshield and glassHelm glass exposed to rain, spray and residue.
• Outdoor textilesCompatible canvas and textile parts of the boat.
• Hull and surfacesChoose a product explicitly intended for the surface.
• Personal watercraftBody and outside surfaces; check the material and the stated compatibility.

The situations we address

• Visibility in the rainWater and dirt can stay on glass surfaces.
• Moisture and dirtGear textiles stay exposed to water and use.
• Different materialsOne product is not automatically suitable for every surface.

Simple, step by step

The right product depends on the material. The product page remains the reference for conditions, quantity and drying time.

1. 1Identify the surfaceSeparate glass, textile and other materials; check the uses listed for the product.
2. 2Clean before treatingOn glass, first remove road film, salt, insects and deposits.
3. 3Apply and let dryFollow the steps for the selected product and respect its delay before exposing the surface to water.

Our products for this use

For a hull or a composite surface, check compatibility on the product page before applying.

• WindshieldOutdoor water-repellent treatmentFor boat windshields, motorcycle visors and RV glass.View product
• Canvas and textilesOutdoor textile waterprooferAn option for compatible gear textiles.View product
• Marine rangeOutdoor productsExplore the outdoor treatments and check the use listed for each surface.View product

Homeowners and professionals follow the same path, by item and material. The suggested size is a starting point: you can change the size and quantity on the product page or in the cart.

What do you want to protect?

Outdoor gear is exposed to changing conditions and can become hard to clean or keep dry.

• Tents and awningsCompatible outdoor textiles; check the label and material.
• Camping gearBags, shoes and textile or leather items.
• RVs and outside surfacesExterior body and equipment; confirm the use on the product page.
• Camping chairsCanvas and textile parts exposed to humidity; check the material before treating.

The situations we address

• Rain and humidityWater soaks into textiles or stays on surfaces.
• Dirt and stainsDust, mud and marks make cleaning harder.
• Outdoor exposureSun, friction and weather wear out the gear.

Simple, step by step

The right product depends on the material. The product page remains the reference for conditions, quantity and drying time.

1. 1Wash, then dryTreat a clean, completely dry surface. Dirt or moisture can affect the result.
2. 2Test a hidden spotFirst test a small, discreet area to check how the material reacts.
3. 3Apply an even coatFollow the textile or multi-surface treatment page and let dry before storing or reusing.

Our products for this use

Check the material of your gear to choose the right treatment.

• Outdoor textilesOutdoor textile waterprooferA product made for compatible outdoor gear textiles.View product
• Outdoor surfacesOutdoor protection rangeSolutions for patio, bike, motorcycle, boat and RV.View product

Homeowners and professionals follow the same path, by item and material. The suggested size is a starting point: you can change the size and quantity on the product page or in the cart.

What do you want to protect?

Gear follows its owner through rain, mud and repeated activity. A solution by material helps keep it easier to maintain.

• GolfEquipment and textiles exposed to dew and rain.
• BagsCompatible textile or leather sports and golf bags.
• ShoesShoes and boots made of a material covered by the treatment.
• Technical clothingTextiles compatible with the listed product.

The situations we address

• Dew and showersMoisture often comes with outdoor activities.
• DirtGrass, mud and dust mark the gear.
• Wear from useItems are used and cleaned often.

Simple, step by step

The right product depends on the material. The product page remains the reference for conditions, quantity and drying time.

1. 1Read the material labelConfirm the composition and choose a textile/leather or outdoor treatment intended for this use.
2. 2Clean and dryRemove dirt; apply only when the item is clean and dry.
3. 3Test, apply, dryTry a discreet area, apply as directed, then let dry completely.

Our products for this use

Choose the product based on the material of your gear.

• Golf and outdoor gearOutdoor textile waterprooferFor golf bags and compatible outdoor gear textiles.View product
• Bags and shoesTextile and leather protectorFor items made of a compatible material.View product

Homeowners and professionals follow the same path, by item and material. The suggested size is a starting point: you can change the size and quantity on the product page or in the cart.

What do you want to protect?

Liquids and dirt can mark fibres or leather. Choosing the right product and testing first reduce the risk before treating the item.

• Clothing and coatsCompatible textiles as listed on the product page.
• Shoes and bootsFabric, leather or mixed materials to check.
• HandbagsCompatible leather and textiles.
• AccessoriesTextile or leather items whose label allows it.

The situations we address

• SplashesA coffee or a sudden rain can leave a mark.
• Everyday dirtFibres and materials absorb marks over time.
• Delicate materialsThe finish, colour or coating can vary from one item to another.

Simple, step by step

The right product depends on the material. The product page remains the reference for conditions, quantity and drying time.

1. 1Check and cleanRead the garment label and clean the item as recommended; it must be dry.
2. 2Test a hidden areaApply a small amount to a discreet spot and check the result once dry.
3. 3Treat without soakingApply evenly as directed on the product page. Let dry before wearing or storing.

Our products for this use

Read the product instructions and always test a discreet area.

• Textile and leather protectionTextile and leather protectorChoose this protection based on the material listed on the item.View product
• Protection and stain remover kitTextile and leather waterprooferKit with protector and stain remover for compatible items.View product

Homeowners and professionals follow the same path, by item and material. The suggested size is a starting point: you can change the size and quantity on the product page or in the cart.

What do you want to protect?

Humidity, splashes and dirt build up on outdoor surfaces and mean more frequent upkeep.

• Patio cushionsCompatible outdoor textiles.
• Chairs and benchesTextile, leather or hard surface to identify before treating.
• Outdoor sofasFabric or leather cover, according to the label.
• Metal furnitureUse a treatment only if the material and the product are compatible.

The situations we address

• Rain and splashesWater can soak into cushions and textiles.
• Stains from useMeals, drinks and dirt mark the fabrics.
• Repeated cleaningFurniture left outside needs regular upkeep.

Simple, step by step

The right product depends on the material. The product page remains the reference for conditions, quantity and drying time.

1. 1Separate the materialsIdentify the fabric, leather, metal or glass; do not treat all the furniture with the same formula.
2. 2Clean and dryThe textile surface must be clean and dry. Test a discreet area first.
3. 3Apply as directedFollow the textile/leather protector or hard-surface treatment page; let dry before exposure.

Our products for this use

Confirm the cover material before choosing the treatment.

• Cushions and textilesTextile and leather protectionFor cushions, sofas and chairs made of a compatible material.View product
• Other outdoor surfacesOutdoor rangeCheck the uses and materials listed on each product page.View product

Homeowners and professionals follow the same path, by item and material. The suggested size is a starting point: you can change the size and quantity on the product page or in the cart.

What do you want to protect?

Outside surfaces and grout are exposed to water marks, dirt and humidity; the product must match the material exactly.

• Windows and glazingResidential or commercial glass.
• Mineral groutCement or mortar grout in wet areas.
• Ceramic and tileSurfaces compatible with the dedicated treatments.
• Roofs and fencesContact us to confirm compatibility with your material.

The situations we address

• Hard-to-wash glazingRain, pollution and mineral deposits build up.
• Damp groutMineral grout can absorb water and dirt.
• Material compatibilityEach building surface needs a product suited to its material.

Simple, step by step

The right product depends on the material. The product page remains the reference for conditions, quantity and drying time.

1. 1Identify the exact surfaceSpecify whether it is glass, ceramic or mineral grout. Epoxy and silicone joints are not covered by the mineral grout protector.
2. 2Prepare the areaClean, then let dry; the anti-limescale treatment requires removing existing deposits.
3. 3Apply the targeted productFollow its product page. For mineral grout, the product page describes brushing it onto clean, dry grout.

Our products for this use

For a roof or a fence, ask us to confirm compatibility first.

• Windows and glazingSelf-cleaning window treatmentFor compatible glazing; check the application conditions on the product page.View product
• Mineral groutWaterproof grout protectionFor cement/mortar grout only; not for epoxy or silicone.View product
• Ceramic and glassAnti-limescale systemFor the glass and ceramic surfaces the product is made for.View product

Homeowners and professionals follow the same path, by item and material. The suggested size is a starting point: you can change the size and quantity on the product page or in the cart.