Cleaner, Decontaminant Glass, Ceramic, Mirror & Vitrocéramique

Glass, Ceramic & Mirror Decontaminant/Cleaner

Product Overview: NanoProtection Glass & Ceramic Cleaner is a potent cleansing solution formulated with abrasive agents. Primarily designed for the final surface preparation before applying Nano processing products, this cleaner is meticulously calibrated for each surface type (excluding marble) to ensure optimal adhesion and durability of subsequent treatments. Glass & Ceramic Cleaner effectively primes surfaces for most treatments, except for plastic.

Usage: Application Guidelines: Apply the product within a temperature range of +5 °C to +30 °C. Avoid direct sunlight during application. Treat small areas at a time if the temperature exceeds 30 °C. Do not apply below 0 °C. Ensure normal air humidity and temperature conditions during application.

Surface Preparation: Prior to application, surfaces must be thoroughly cleansed of coarse and visible pollutants, including impurities, traces of limestone, and dirt.

Application Tips: Before use, ensure thorough shaking of the product. Apply Glass & Ceramic Cleaner onto a sponge and clean the surface using circular motions. Allow the product to dry for 1-2 minutes until a white veil appears. Polish the surface with a lint-free cloth to remove any residual dry product. After cleaning, avoid touching the surface with fingers or exposing it to water if a nano treatment is to be applied. Do not use chlorinated products, as they may emit harmful fumes. Avoid application on acid-sensitive surfaces like marble, other stones, plastic, or acrylic, as this may cause scratches.

Recommended Usage Amount: Approximately 10-20 ml/m²

Drying Time: At temperatures of 30 °C, the product dries rapidly within approximately 30 seconds.

Storage: Store the product in its original packaging for up to one year without opening. Keep in a location between +5 °C and +25 °C, away from direct sunlight. Ensure that opened containers are tightly sealed.