Leather is a durable material used to cover furniture, footwear, vehicle upholstery, in the manufacture of clothing, among others. Leather is a very elegant material, but it is also one of the most difficult to clean.
To remove stains, we should not apply abrasive products that damage the leather as they remove the protective layer and shine. Therefore, you should carefully consider the best cleaning method.
Below we show you how to remove five types of stains that affect the appearance of the leather.
Grease stains
Leather is sensitive to grease, so it must be cleaned urgently as it will damage it forever. There are several suitable chemicals on the market, although there are household methods that also work. To remove grease stains, apply turpentine with a cloth until it disappears. This product dissolves grease, oils, waxes and natural resin products.
Wine stains
Wine stains must be cleaned immediately. The first thing to do is to place a paper towel to remove as much liquid as possible. To remove the stain, you can put baking soda on it, let it work for a few minutes and then remove it. Then apply hydrogen peroxide to a cotton pad the size of the stain and rub.
Blood stains
The first step is to moisten the stain with water at medium temperature, do not use hot water. Next, rub the blood stain with a stain remover soap based on natural oil. Remember to apply only to the stain. Then remove it with a damp cloth. Finish by drying the area with a dry cloth.
If the stain is dry, it is best to call in a professional service to remove it.
Paint stains
It is important that the leather does not get wet, as it dries out and gets damaged. Now, to remove fresh paint stains on the leather, mix dish soap and water until you get a lather. You apply it to the stain and rub it off. You can also remove it with saddle soap. If the paint stain is not completely removed or is hardened, it is best to leave it to a professional cleaning service.
Mould stains
You should remove loose mold with a soft bristle brush in a ventilated area and wear a mask before applying any cleaning products. You immediately vacuum up any remaining mould and rub the area with soap suds without getting it wet. Then you dry with a cloth. Finally, you apply a product to protect the equipment.
The maintenance of this equipment requires special care. To keep the leather without problems, the indicated thing is prevention. The products made by Nanoprotection waterproof the leather to protect it against water, dirt, stains and contamination.
The life of the leather is extended if you use appropriate cleaning methods and protect it with nanotechnology. For more information, visit nanoprotection.ca.