Anti-limescale cleaner – Tartar and rust remover – Eco-friendly
Eco-friendly anti-limestone and rust cleaner
Product characteristics: Anti-limescale cleaner, tartar and rust remover.
|Use||Ceramic surfaces, glass, enamel, chromium, concrete, stone, plastics…|
|Pre-cleaning the surface||The surface must be freed from all coarse and visible dirt.|
|Drying time||Leave the action at least 15 minutes.|
|Package (s) available||100 ml and 200 ml|
|Amount of use||Approx. 30-100ml/m².|
|conservation||Keep between + 5 °c and + 25 °c in a safe place from the Sun.|
NanoProtection’s anti-limescale cleaner is an ecological gel innovative cleaner in its operating principle. It is suitable for the removal of stubborn traces of limestone, limescale, tartar, rust and SOAP on sanitary surfaces.
Impurities are raised and eliminated without surface aggression. No mechanical action is required. A simple rinse of the product with water is sufficient.
The product is in gel form is a shower glass limescale remover that it can be applied easily on vertical surfaces without any runoff effect.
Instructions for use
Apply Nanoprotection Eco-friendly anti-limescale cleaner and rust remover to the surface soiled by limestone using a sponge. Leave for at least 15 minutes.
In the most stubborn cases, the action time can be 2-4 hours. For the most stubborn dirt, a second pass with a sponge soaked with a product may be necessary.
After disdetachment and fragmentation of impurities, rinse thoroughly with water or with a clean wet sponge.
On lacquered or plastified surfaces, perform a test on a small area not visible beforehand.
- Ideal for all surfaces: ceramics, glass, enamel, chromium, concrete, stone, plastics
Properties of Eco-friendly anti-limestone remover and rust cleaner
- Indispensable ally for places very exposed to limestone (bathroom, WC, kitchen)
- Eliminates traces of limestone without attacking matter
- ULTRA-SIMPLE cleaning: no need to rub to remove the limestone!