Technical sheet ceramic +
Product features: CERAMIC +
|Category||Residential, Auto-Moto-boat, retailer & professional|
|Use||Quartz, marble and natural stone, plastic, metal, glass-ceramic, bodywork|
|Pre-cleaning the surface||yes.|
|Package (s) available||50 ml|
|Amount of use||Approx. 5-10ml/m² (10.76 ft ²)|
|conservation||Keep between + 5 °c and + 25 °c in a safe place from the Sun.|
|Special feature (s)||Product is easily flammable and corrosive. Mandatory glove wear, goggles and mask recommended.|
|Duration of action||3 to 4 years.|
Our latest generation ceramic treatment for car and motorcycle is designed to give fairings, rims and bodyshells anti-adherent properties and anti-scratch scratches.
All our protection treatments are derived from nanotechnologies. When applied the treatment CERAMIC + forms on the surface a film of protective glass totally invisible, hydrophobic and anti-adherent. The extremely hydrophobic and oleophobic properties of the coating reduce the adhesion of dirt and water droplets, greatly facilitating the cleaning of the treated surface: it is the “easy to clean” effect. In addition to this property it brings to the varnish a hardness of 9H, allowing it to resist all kinds of micro-scratches while retaining its original brilliance. In fact it also prevents corrosion.
Until now, even the most advanced technologies in the field of ceramic treatments were not able to combine strong Hydrophobia with a high hardness on synthetic or metallic surfaces.
The inorganic groups of our coating provide a perfect adhesion with a hardness of 9H, while the organic groups generate very pronounced anti-adhesive effects (Hydrophobia).
Instructions for use
1. clean the surface with the body/ glass and ceramic cleaner that eliminates all traces of pollution, fat, silicone and wax. It is also the only cleaner that allows the CERAMIC + treatment to adhere to the surface.
2. apply the product: shake well before use. Pour a small amount of product onto a clean, dry soft cloth. Spread with circular motions, then Polish the surface with another clean cloth until there is no more sail (the bigger one), in order to remove the surplus product.
This step can, if necessary, be repeated up to 3 times at regular intervals of 5-10 minutes to increase the thickness of the layer and thus the efficiency of the ceramic coating. At the end, use a clean microfibre cloth if necessary to eliminate the latest product residues.
- Rims, bodywork (all types of varnishes), plastics, metals
- Chrome-plated auto/motorcycle surfaces
Maintenance of treated surfaces
The treated surface is easily cleaned with water. The use of maintenance products is no longer necessary.
Duration of action
The treatment is active for a period of approximately 3 to 4 years under normal use conditions and without use of aggressive chemicals for maintenance. This duration may vary depending on the uses of the treated surfaces.
Main advantages of CERAMIC +
- Unique and innovative properties
- Hardness of 9H (harder than automobile paint)
- “Easy to clean” permanent effect
- Exceptional resistance to weather, abrasion and chemical products
- Food safety and chemical inertia
- Transparent, practically invisible. A deeper color is possible when applying
- Water repellent and anti-fouling effect
- Improved paint properties
- Lifespan/longevity of 3-4 years
- Bird droppings protection
- Protection against scratches caused by
- Protection against gloss loss
- Heat resistant up to 600 °c
- Anti-corrosion effect